OpenECU M130
OpenECU M130
The M130 OpenECU is a compact multi-purpose controller designed to support applications that require four CAN channels in a small form factor, including CAN-to-CAN message forwarding, CAN-to-LIN message translation, and sensor-to-CAN data broadcasting. Applications could be a CAN gateway module, a CAN to LIN gateway, a CAN I/O expansion box, smart relay driver, an embedded system control supervisor or an alternative fuel system controller.
The M130 is managed by an advanced 32-Bit NXP microprocessor and has 4 highs speed CAN2.0B channels, a total of 6 analog/digital inputs, 2 analog voltage outputs and 1 5V 200mA sensor power supply output. The M130 can whitelist specific IDs to shield one CAN bus from unwanted CAN messages on a different bus, for data protection purposes and can also be used to modify the CAN messages from one bus before transmitting them on the other bus. Using the two LIN channels and the six analog inputs, the M130 can also broadcast smart sensor data to any of its four CAN busses.
The M130 is programmed using MATLAB/Simulink tools that significantly speed up algorithm development by using automatic software integration and code generation. In addition, developers can quickly test application software using simulations and automated testing. Dana systems, controls and software engineers are available to support application implementations from prototype to production.
Key Specifications:
- Programming: MATLAB/Simulink with OpenECU™
- Processor: NXP SPC5746B (32-bit) @ 80 MHz
- Memory:
- 256KB RAM
- Code space: 3MB
- Calibration space 256KB
- Operating Voltage: 8–32V
- Survive Voltage: −28V to 36V
- Inputs:
- 1 ignition
- 6 analog/digital (RTD capable)
- Outputs:
- 6 × 500mA low-side drivers
- 4 × 2A low-side drivers
- 2 × 0–5V analog voltage outputs (±10mA)
- 1 × 5V 200mA sensor power supply
- Up to 9 program status LED drives
- 1 × reprogramming enable @ 18V
- Output Protection: Short to battery, short to ground
- Battery Input Protection: Overvoltage, reverse voltage
- Communication:
- 4 × high-speed CAN 2.0B (CAN-FD capable)
- 2 × LIN master (LIN slave on 1 channel available as population change option)
- Wake on CAN (CANA)
- Electromagnetic Compatibility(Targeted):
- Conducted emissions CISPR25 Class 2
- radiated emissions CISPR25 Class 2
- immunity ISO 11452-4
- conducted transients ISO 7637-2
- ESD SAE J1113-13
- Environmental: −40°C to 85°C, IP67 sealed, vibration ISO 16750-3 Test VII
- Construction:
- Material: PPA GF33
- Dimensions: 138 × 130 × 42 mm (L × W × H)
- Connector: 2 × 20-pin Molex MX150